Temperature-Controller-bayite-BTC201-Pre-Wired-Digital-Outlet-Thermostat-2-Stage-Heating-and-Cooling-Mode-110V-240V-10A-0Temperature-Controller-bayite-BTC201-Pre-Wired-Digital-Outlet-Thermostat-2-Stage-Heating-and-Cooling-Mode-110V-240V-10A-0Temperature-Controller-bayite-BTC201-Pre-Wired-Digital-Outlet-Thermostat-2-Stage-Heating-and-Cooling-Mode-110V-240V-10A-0-0Temperature-Controller-bayite-BTC201-Pre-Wired-Digital-Outlet-Thermostat-2-Stage-Heating-and-Cooling-Mode-110V-240V-10A-0-1Temperature-Controller-bayite-BTC201-Pre-Wired-Digital-Outlet-Thermostat-2-Stage-Heating-and-Cooling-Mode-110V-240V-10A-0-2Temperature-Controller-bayite-BTC201-Pre-Wired-Digital-Outlet-Thermostat-2-Stage-Heating-and-Cooling-Mode-110V-240V-10A-0-3

Temperature and Humidity

Temperature Controller bayite BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V – 240V 10A

$90.00

Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature range
Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors

Buy from Amazon.com


The BTC201 (BTC200 Series) temperature controller can turn on/off an electric appliances at desired temperature.
And the operation has been simplified for ease of use.

For example, you can use the controller to turn on/off a heater and a fridge to keep temp around 100 F. Turn on heater at 98.5 F. Turn on fridge at 105 F. Turn off the heater/fridge when temp reaches 100 F. The setting is (SV=100, Cd=5, Hd=1.5). Please note that the controller itself doesn’t change temp.

Main features:
1-YEAR Warranty
Plug and play. No worry about wiring.
Maximum load: 1100W @110V or 2200W @220V.
On/Off Control, Heating and Cooling
Celsius or fahrenheit read-out.
Temperature calibration.
Compressor delay protection time setting.
High and low temperature alarms are available(This is a useful function. You can use this feature to alarm you when the temperature overshoots your desired temperature)
Auto shut off timer(It doesn’t turn off the controller itself. The timer just turns off the load when specified time counts down to 0.)

Specification:
1.Power supply: AC 110V ~ 240V, 50/60Hz
2.Measure range: -58°F ~ 230°F / -50°C ~ 110°C
3.Temperature resolution: 0.1
4.Accuracy: ±0.5
5.Working mode: Heating and Cooling mode
6.Max span between turn-on degree and turn-off degree is 25
7.Control resolution: 0.1
8.Power consumption: less than 3W
9.Relay contact capacity: 10A
10.Store setting after power off: YES
11.Compressor delay protection: YES
12.High and Low Temperature alarm: Yes
13.Product size: 4.9×4.5×1.9 inch (12.5×11.5×5 cm)
14.Sensor Cable length: 3m(9.8ft)
Advanced function:
1.Switch temperature unit(Default: F): F or C
2.Switch resolution(Default:0.1): 0.1 or 1
3.Auto shut off timer(Default:OFF)
Package Content:
1x BTC201 Temperature controller
1x sensor cable
1x power cord (1m/3.3ft)
Manual has been updated for easier comprehension. This controller uses independent heating and cooling toggling points to keep your environment in the ideal temperature range
Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device
Waterproof sensor, high/low temperature alarm, and automatic power-on delay to protect compressors
MAX LOAD: 1100W at 110V or 2200W at 220V. (Celsius or Fahrenheit Read-out)
WIDE RANGE OF USES: seedling heat mat, home brewing, beer brewing, aquarium heater, pet breeding, incubation, BBQ, fermentation, accelerating germination, electric radiator, electric oven, heat mat, etc

There are no posts related to Temperature Controller bayite BTC201 Pre-Wired Digital Outlet Thermostat, 2 Stage Heating and Cooling Mode, 110V - 240V 10A.